Sicce Shark MIINI Surface Skimmer 350 Plus

Sicce Shark Mini Skim 350 Surface Skimmer

The Sicce Shark Mini Skim 350 Surface Skimmer is a compact internal surface skimmer for removing surface film, floating dust, plant debris, and oily buildup from freshwater and saltwater aquariums. It helps keep the water surface clear so gas exchange, light penetration, and overall aquarium appearance are improved.

Sicce Shark Mini Skim 350 for Aquarium Surface Clarity

The standard Shark Mini Skim 350 is ideal for aquariums with thinner glass where a small dedicated surface skimmer is preferred over adding a larger filter or overflow system. Its floating intake adapts to minor water level movement, while the adjustable flow and rotating outlet make it easier to tune the skimmer for the aquarium layout.

Compact Skimmer Design for Thin-Glass Aquariums

• Removes dust, floating debris, oils, and surface biofilm from the aquarium surface.
• Standard 350 model magnetic support is rated for glass up to 6 mm or 0.25".
• Skimmer float has approximately 30 mm or 1.2" of travel to adapt to small water level changes.
• Rotating system helps improve surface intake alignment.
• Flow regulation allows output to be adjusted for the aquarium.
• Multidirectional flow deflector helps aim returned water.
• Protection grid helps keep very small fish away from the inlet.
• Mechanical foam captures fine debris drawn from the water surface.
• Suitable for freshwater, planted, and saltwater aquariums.

Shark Mini Skim 350 Flow and Glass Rating

• Maximum flow: 350 L/h or approximately 90 US gph
• Power consumption: 6 W for 110-120 V / 60 Hz operation
• Cable listing: SIC209 7.55 ft 2-prong US cable
• Glass thickness support: Up to 6 mm or 0.25"
• Float travel: Approximately 30 mm or 1.2"
• Application: Aquarium surface skimming and floating-film removal
• Installation: Internal aquarium use with magnetic support

Sicce Shark Mini Skim 350 and 350 Plus Video

Shark Mini Skim 350 Placement and Cleaning Directions

1. Mount the skimmer inside the aquarium on clean glass up to the supported thickness.
2. Set the floating intake at the water surface so it draws in surface film correctly.
3. Rotate the skimmer and aim the flow deflector to improve surface movement without disturbing livestock.
4. Use the flow regulator to reduce or increase surface draw as needed.
5. Keep the intake grid clear of plant leaves, algae, and trapped debris.
6. Rinse the mechanical foam regularly to maintain stable flow.
7. Disconnect power before cleaning, disassembly, or repositioning.

What's Included

• Sicce Shark Mini Skim 350 Surface Skimmer
• Magnetic support
• Protection grid
• Multidirectional flow deflector
• Mechanical filtration foam