KAMOER ATO ONE V2

Product Description

ATO One 2 is an intelligent water replenishment device, is an upgraded version of ATO One. - NEWLY Released in 2022

ATO One 2 SE is the standard version with submersible pump, it only needs to install the sensor and submersible pump, which can be used after power on without setting. The sensor is fixed by magnet, which is convenient for installation and adjustment. Equipped with optical level sensor, blue optical level sensor is used to monitor the water level and decide whether to replenish water, red optical level sensor is used to prevent the overflow. ATO One 2 SE has rich status indication, when the refill water overflows or overtime, when the water in the refill container is insufficient, ATO One 2 SE will have indicator light and buzzer alarm.

ATO one 2 RO is the version of solenoid valve. It only needs to install the sensor and solenoid valve, which can be used after power on without setting. The sensor is fixed by magnet, which is convenient for installation and adjustment. Equipped with optical level sensor, blue optical level sensor is used to monitor the water level and decide whether to replenish water, red optical level sensor is used to prevent the overflow. ATO One 2 RO has rich status indication, when the refill water overflows or overtime, when the water in the refill container is insufficient, ATO One 2 RO will have indicator light and buzzer alarm.

Note

Please use the power adapter that comes with the product.

The optical level sensor should be away from the air bubbles; otherwise it will be misunderstood due to interference.

The optical liquid level sensor is susceptible to the influence of dirt. Please pay attention to erasing the dirt on the sensor.

This product does not have waterproof function. Please use it in the environment of temperature 0-40 ° C and humidity <80%.

Warranty

We warrant your product against any defect in material and workmanship, under normal use. In the event a product is found to be defective within the warranty period of one year, we will, at our option, repair or replace the defective product. The warranty period starts at the day of purchase. For warranty validation, a proof of purchase must be furnished.

The followings are excluded from the warranty:

1. Improper use of the device causing malfunction;

2. The device is repaired or modified by an unauthorized person;

3. Use of non-produced material by our company i.e. pump tube;

4. Damage by disaster;

5. Improper maintenance causing damage;

6. Use of reagent or sample causing corrosion;

7. Damage by accident or over load;

8. Consumables, such as silicone tube and fuse etc.

To obtain warranty support, you may contact our local technical support. Our technical support will attempt to diagnose and correct the problem. If the problem cannot be rectified, our technical support will ask you to return the product. You will be asked to furnish proof of purchase to confirm that the product is still under warranty.

What's in the box?

1 x ATO One controller

1 x S1 Optical sensor

1 x S2 Optical sensor

2 x Optical sensor bracket

4 x Plastic magnetic stickers

1 x DC 12V Power supply

1 x Refill pump

1 x Tube holder

1 x Siphon break

2 x PVC tubing